There are problems with the quality and material of the brake disc itself. The machining accuracy is not enough or the casting deviation is large. No dynamic balance is done, causing trembling.


Key words: brake disc; Shaking; Solution; Reason 1. There are problems with the quality and material of the brake disc itself. The machining accuracy is not enough or the casting deviation is large. No dynamic balance is done to cause shaking. 2. The repair shop did not clean the shaft head, brake disc, and rust and dust on the bottom of the tire rim, causing the brake disc to be installed unevenly and trembling. recommendations more...

RELATED INFORMATION


What should I do if the car brake disc is rusty due to rainy days or long-term suspension

The material of the brake disc is mostly cast iron, and it has been exposed for a long time, and the working environment is relatively evil, and it is often tested by ice and fire. If the vehicle is parked for a long time or in a humid environment, some rust will be generated on the surface of the brake disc, and these rust will more or less affect the normal operation of the brake system, so it is necessary for us to consciously clean it up. Please follow the editor to understand what to do if the car brake disc is rusty in rainy days or long-term suspension.

2024-01-20

The difference between disc brakes and drum brakes

Disc brakes and drum brakes are two commonly used types of vehicles. The so-called drum brakes are composed of devices that rotate, fix, actuate, and adjust positioning. Among them, it is composed of small parts such as bottom plate, sub-pump, shoe and so on. There are usually also connecting rods, springs, studs, brake drums, etc. Today's drum brakes are generally more common in rear-wheel drive cars.

2024-01-20

How to deal with the appearance of grooves in the brake disc

Only the front or only the rear brake disc has grooves due to driving habits and uneven distribution of front and rear brake forces. If only one brake disc has grooves and the others are normal, this situation is usually caused by materials or external forces, then how do we deal with the grooves in the brake disc?

2024-01-20