The following running-in instructions are recommended to ensure proper functioning of the brake disc/pad system:

Section where the running-in process is performed: the section where the following driving maneuvers are allowed under the premise of complying with the provisions of the Road Traffic Management Law.

Avoid sudden braking for the first 300 km after replacing the brake disc.

Through moderate running-in, the temperature of the brake disc can be gradually increased under the premise of ensuring that there is no sudden increase in temperature, and the coordination between the friction surface of the brake disc and the friction surface of the brake lining can be realized.

Complete at least 30 times the following braking: the final speed is reached after moderate deceleration (maximum braking duration is 3 seconds) at the average driving speed (about 100 km/h), the final speed is 50 km/h for the first half (approximately) of braking, and the final speed is 25 km/h for the second half (approximately) of braking. There should be an interval of approx. 3 minutes between each brake cycle to allow the brake discs to cool under the action of the air flow.

HAICHEN will not be liable for damage to the product or injury to others and property damage as a result of not following this instruction. In addition, HAICHEN will not be liable for damage and/or defects caused by high-intensity use and/or personal driving habits and/or due to exceeding the scope of the specified use.